If you get this error when you boot your electronic computer or laptop, then you feature come to the exact place!
Now we bequeath quickly analyze the reasons and feasible ways to eliminate the error " CPU buff error campaign F1 " by the pit .
Literally, this means the shadowing: an error in the fan for the processor, press "F1". That is, to proceed booting the computing machine, bu press the "F1" button.
Merely the problem itself, because of which this error appeared, will not melt.
In broad, when you turn on the computer, its intimate program polls all devices and checks their parameters.
When errors are heard, the corresponding messages are displayed. Some errors are captious, and further work is impossible, while others are not scathing, as in our case.
That is, you stool constrict the button and work promote, but you ask to be sure in your actions, because if the CPU cooler is not really spinning, the computer may overheat.
Reasons for the message "CPU buff computer error press F1."
The processor fan is connected to a unscheduled socket along the motherboard, which is called "Mainframe Fan." There are other connectors, much as "Chassis Fan" or "Power Fan," which can be associated to the case OR whatsoever other fans.
The BIOS of the computer determines the performance of the buff by the number of its turns, i.e., if the speed is "zero," then the cooler is considered not-operative, and an error message is displayed.
So, same often the processor fan is connected to the wrong connector, and the BIOS simply does not see IT! To resolve the problem, you honorable pauperism to reconnect the wires to the correct connexion, and that's it!
IT also happens that the cooler secure is deuce-ac-pin, and the connexion on the motherboard is four-pin.
You can connect them, and everything will spin, but the BIOS may non recognize the speed sensor and there will be the same wrongdoing. This is uncommon, and usually, everything is thin.
But if this is your instance, then there are two options: either gain vigor compatible equipment, or ignore the erroneous belief (see downstairs).
If everything is connected correctly and everything worked before, then it's time to open the palpebra of the system unit and baulk if the C.P.U. fan is spinning.
Maybe the destitute fellow has already become clogged with dust and is no more spinning. Operating room wires have unchaste into the blades, and they do non allow them to move.
You can judge to clean the fan and radiator, then again you still need to go and take a new cooling arrangement.
As exercise shows, cleanup helps very briefly, and if it reached the point that the cooler stopped spinning at all, then this is a bad matter.
At my house, there was such that everything was spinning and was connected correctly. The problem was in the very "CPU Fan" connector. He did not read the rotation sensor, just did not see it, or only from time to tim.
I had no pick merely to relate the fan to another connector along the motherboard. I still received the wrongdoing "CPU fan computer error error" F1 ", but I could control the rotation speed on the other connector.
For much and similar cases, it remains only to turn off the erroneous belief message.
How to ignore an error when booting the computer
Fortuitously, in just about all bios there is a social occasion to incapacitate the monitoring of the rotation cannonball along of the CPU Fan.
Dependent on the BIOS version, the selection Crataegus laevigata be in different places, but it will be called approximately the same.
Go to the BIOS, and look to the tabloid "Power."
To disable trailing, plant the "CPU Fan Speed" option to "N / A" or "Injured." But now you have to make true that the cooler works.
That is, periodically glancing whether IT is spinning, or observing the number of its turns on another connector. Not superfluous from metre to clip to monitor the temperature of the processor.
It is convenient to monitor computer settings with the help of a special program. In AIDA64, you can see the processor temperature and fan speed in the section " Computer -> Sensors. "
On my laptop does non render the rotation speed, but you can see complete the temperatures. In general, the average speed of coolers is about 1500-2500 rpm (RPM).
It will not be surplus to configure the thresholds for automatically shutting down the computer when overheating. This is also done in the BIOS.
Also, it is possible to completely disable waiting for pressure the "F1" button for whatever non-important errors. To do this, use the "Wait For F1 if Error" option, which is enabled away default.
To disable, set to "Disabled." In the new "bios" UEFI, this option is in the "Boot."
Conclusion
We patterned out wherefore an error occurred when the computer "C.P.U. fan mistake press F1" started up and what to do so that it does non repeat every time it is turned on.
According to statistics, the greatest number of problems collect to an unsupported or retard fan. When it is scantily spinning, the rotation sensor shows zero. Also, sometimes it is incorrectly connected.
With a altogether non-working tank, the processor most likely will non burn, but IT will work same slowly, and there may be diverse errors in Windows if information technology boots at all.
How to disable avast antivirus? Come home here to know.
Cpu Fan Speed Error Detected Asus Rog Press F1 to Run Setup
Source: https://errorcodeguru.com/cpu-fan-error/
Post a Comment